ACCESSORIES
- HOME
- PRODUCTS
- ACCESSORIES
Pedestal Systems
Pedestal system is the complete vertical,
adjustable supporting structure to the
raised floor panels.
features :
- Compatible with solid, perforated and
grating panels - Pedestal available for all seismic
environments. - Finished floor heights from FFH100mm to
FFH1,700mm. - Pedestal system consists of base, tube,
bolt, nut, head and cushion pad. - Range of adjustment on normal pedestals
is ±25mm - Axial load : 3,000kgf ~ 11,800kgf
- Available with bare, e-coat or/and epoxy
powder coat.
Aluminum Pedestals
Steel Pedestals
Technical Information
| Material | Type | FFH (mm) | Dimension (mm) | Axial Load | Finish |
|---|---|---|---|---|---|
| All Aluminum |
S/D | 250 ~ 600 | 100(Base) + Ø33(Tube) + M25(Bolt) + One Nut + Al. Head | 4,300kgf (9,500lb) |
Aluminum Bare E-Coat Epoxy powder coat |
| H/D | 600 ~ 1000 | 150(Base) + Ø50.7(Tube) + M25(Bolt) + One Nut + Al. Head | 5,890kgf (13,000lbs) |
||
| Steel Base with Aluminum Head | L/D | 150 ~ 250 | 100(Steel Base) + M16(Steel Bolt) + One Nut + Al. Head | 7,700kgf (17,000lbs) |
Aluminum Bare E-Coat Epoxy powder coat |
| S/D | 150 ~ 600 | 150(Steel Base) + Ø33.1(Steel Tube) + M16~M20(Steel Bolt) + 1Nut + Al. Head | 9,500kgf (21,000lbs) |
||
| M/D | 600 ~ 800 | 150(Steel Base) + Ø48.6(Steel Tube) + M20~M24(Steel Bolt) + 1Nut + Al. Head | 9,920kgf (22,000lbs) |
||
| H/D | 800 ~ 1200 | 170(Steel Base) + Ø48.6(Steel Tube) + M22~M24(Steel Bolt) + 1Nut + Al. Head | 10,800kgf (24,000lbs) |
||
| E/D | 1200 ~ 1500 | 200(Steel Base) + Ø60.5(Steel Tube) + M24(Steel Bolt) + 1Nut + Al. Head | 11,800kgf (26,000lbs) |
View Panel
Solid Panel can be fitted with and acrylic cover
to enable quick and handy access to equipment
devices located under the raised floor.
Aluminum Damper
Perforated and grating panels can be fitted with
aluminum dampers.
This unique damper system allows uniform
balancing of air throughout the room or around
workstations and manufacturing tools.
Close
Open
Stringers
Stringer is a horizontal component that connects pedestals
together. It connects to the pedestal head
and is used to provide additional lateral support at
greater floor height and/or increase the structural
performance of the raised floor system.
Bracings
This backing of the floor system is
installed for heavily loaded areas such
as tool move-in paths, heavy machine areas
and seismic activity regions.
Post type understructure
This post type of understructure system is composed of main(upper side) and sub(lower side) beams and this type of structure system is the best solution for the limited area where wide span and space are required for the big size air ducts or other utility lines.
- Height range :
FFH 1,500 to 3,000mm - Available post pitch :
1,200 x 1,200mm
1,800 x 1,800mm
2,400 x 2,400mm - Adjustable within :
±25mm
Flat pad type understructure
With this particular flat pad type of understructure system are mainly installed on the top of the concrete waffle structure and The height is adjustable by using a bolt on the main(upper side) beam.
- Height range :
FFH 250 to 500mm - Available plate pitch :
600 x 1,200mm
600 x 1,800mm
600 x 3,000mm - Economical price
- Convenient installation
