Solid (Blind) Panel

All aluminum die cast floor systems are the ideal solution for class A applications.

This solid panel with unique lattice structure are typically used in high-tech environments such as semiconductor, microelectronic, biomedical, pharmaceutical and laboratory facilities where the highest load capacities required.

• 
• Features and Benefits
  • Die cast aluminum panels meet class A fire rating.
  • Excellent rolling load performance.
  • Contains no ferrous materials to disrupt magnetic fields.
  • Various finish materials.
  • Excellent electrostatic discharge and conductivity.
  • Semi-permanent usage materials .

Technical Information

Series	Model	Dimension&Thickness without finish materials	Concentrated Load @ 1/2 Edge point	Ultimate Load @ 1/2 Edge point	Finishing Materials
600	A3L	600mm X t39 ~ t48mm	550kgf	1400kgf	PVC Tile Conductive tiles. Static Dissipative tiles. E-coating Black, Silver color-options. Epoxy powder ESD epoxy powder coat in gray, black and ivory color options. Normal epoxy powder-coat in various color-options. Ni-Cr Plating
600	A3N	600mm X t39 ~ t48mm	650kgf	1600kgf
600	A4L	600mm X t44 ~ t48mm	800kgf	2000kgf
600	A4LS	600mm X t44 ~ t48mm	900kgf	2250kgf
600	A4N	600mm X t48mm	1000kgf	2300kgf
600	A4M	600mm X t48mm	1200kgf	2500kgf
600	A4E	600mm X t48mm	1500kgf	3300kgf
600	A4U	600mm X t48mm	1800kgf	4000kgf
600	A4US	600mm X t48mm	2000kgf	4200kgf
600	A4UH	600mm X t48mm	3000kgf	7000kgf
610(24”)	A2N, A2E	24”(609.6mm) X t48mm	2200lbs, 3000lbs	4600lbs, 6600lbs

• 
• 

With 1,024 or 1,296holes chamfered holds and available with top surface adjustable damper to control airflow volumes from 18% to 23% to meet specific airflow requirements for high-tech sectors or applications like Class 1 clean-room and Data centers.

ZIP ENC's perforated panel is the better solution for creating cooling aisles for server and equipment rooms to prevent overheating.

• 
• Features and Benefits
  • High load bearing capacity
  • Open ratios ranging from 18% to 23%
  • Available with top adjusting slide dampers.
  • Various finish materials.
  • Excellent electrostatic discharge and conductivity
  • Semi-permanent usage materials

Technical Information

Series	Model	Dimension&Thickness without finish materials	Open Ratio	Concentrated Load @ 1/2 Edge point	Ultimate Load @ 1/2 Edge point	Finishing Materials
600	A3L	600mm X t39 ~ t48mm	18%~22%	500kgf	1250kgf	PVC Tile Conductive tiles. Static Dissipative tiles. E-coating Black, Silver color-options. Epoxy powder ESD epoxy powder coat in gray, black and ivory color options. Normal epoxy powder-coat in various color-options. Ni-Cr Plating
600	A3N	600mm X t39 ~ t48mm	18%~22%	600kgf	1500kgf
600	A4L	600mm X t44 ~ t48mm	18%~22%	800kgf	1900kgf
600	A4LS	600mm X t44 ~ t48mm	18%~22%	800kgf	2000kgf
600	A4N	600mm X t48mm	18%~22%	1000kgf	2200kgf
600	A4M	600mm X t48mm	18%~22%	1200kgf	2300kgf
600	A4E	600mm X t48mm	18%~22%	1400kgf	3200kgf
600	A4U	600mm X t48mm	18%~22%	1700kgf	3800kgf
600	A4US	600mm X t48mm	18%~22%	2000kgf	4000kgf
610(24”)	A2N, A2E	24”(609.6mm) X t48mm	18%~22%	2200lbs, 3000lbs	4600lbs, 6400lbs

• 
• 

Available with or without a damper, it can be adjusted from the top to restrict airflow by up to 100%. Also with octagonal rib structure minimizing vibration from dynamic loading and the high strength, low weight all aluminum die casted panels.

It is the ideal solution for use in contained aisles with high foot traffic.

With the ability to perform the same amount of cooling as 2.5 perforated panels without comparable cost so it is very cost effective airflow panels.

• 
• Features and Benefits
  • Die casted aluminum panels with 51% unobstructed open area.
  • Interchangeable with solid and perforated panels.
  • Available with or without top surface adjustable dampers.
  • Excellent electrostatic discharge and conductivity.
  • Semi-permanent usage materials.

Technical Information

Series	Model	Dimension&Thickness without finish materials	Open Ratio	Concentrated Load @ 1/2 Edge point	Ultimate Load @ 1/2 Edge point	Finishing Materials
600	A4N	600mm X t50mm	51%	1000kgf	2200kgf	E-coating Black, Silver color-options. Epoxy powder ESD Epoxy powder coat. Ni-Cr Plating
610(24”)	A2N	24”(609.6mm) X t50mm	51%	2200lbs	4600lbs

• 
• 

• 
• 
• 
• 
•